SP Flash Tool Latest version 5.1824.00.0

Sp Flash Tool

About Sp Flash Tool

SP Flash Tool helps you to flash or install factory firmware And custom ROMs on your Android smartphones ( MTK CPU based Android Mobile Phones And Android-Based Tablets ). Most important usage of this application is upgraded, downgrade or flash custom ROMs of your Android devices. With the MTK Sp FlashTool, you perform many things like Flash, Unbrick, Format, Hard Reset, Run Memory diagnostics And etc In your MTK CPU based Android smartphones. This is the best Android MTK flash-Tool available. Download from our Website in Boxes & Dongles section.


  • Download Extract and install VCOM USB drivers (Extract Using Winrar, 7zip Software)
  • Open Downloaded Flash tool
  • Remember Must Before Flashing Charge your android device battery more than 40/50%
  • Get original quality USB Data Cable for connection between (Mobile/tablet And computer/Laptop)

How to use Sp Flash Tool

  • You need to Download and open  Sp Flash tool (or use any flashing box)
  • Download and extract MTK USB drivers
  • Extract Downloaded your required device MTK Firmware Factory File
  • Turn off Your Android Mobile/Tablet device
  • Now Extract and open downloaded sp, flash tool
  • After opening sp flash tool click on Scatter, loading Dialog Box
  • Select scatter file from extracted Firmware
  • After select the scatter file Click on the download button (top on left) in sp tool
  • Press boot key and connect your device with the computer using USB Data Cable
  • Boot key is volume up or volume down key
  • After USB data cable connect your device will shake hand with computer
  • When Connection complete run red line in sp flash tool and flashing process will start
  • Now sit back, relax and  Wait For some time till flashing process complete
  • when flashing complete sp, flash tool show you ok sign in the yellow color circle
  • Good Luck now your Android Mobile/tablet device is again ready for your precious use

Download Links





Video Guide! How to use “Sp Flash Tool”

Note 1: Make sure and Must remember to save a full backup of your Android device before using the Sp, flash tool. because of your personal data information Included as photos, contacts, messages could be removed all during the flashing process of  Sp, Flash Tool.

Note 2: Before Flashing your Android Mobile Device you need to save your Gmail address and remove from your mobile phone. Becoz if you do not remember and save your Gmail account after flashing your device Has got F-R-P (factory reset protection) and after flashing you need your Gmail account for configuring your mobile phone.