Skip to content

A Practical Guide to DIY iPhone XR Broken Back Glass Replacement: Step-by-Step Instructions

Is the sleek back glass of your iPhone XR marred by unsightly cracks or damage? Fret not; with a bit of patience and the right tools, you can embark on a DIY journey to replace the broken back glass of your device. In this comprehensive guide, we’ll take you through each step of the process to ensure a successful and cost-effective repair.

iPhone XR Broken Back Glass Replacement: Step-by-Step Instructions

Before diving into the repair, it’s important to acknowledge that iPhone repairs, especially involving the replacement of glass components, carry inherent risks. Proceed at your own risk, and if you feel uncomfortable at any point, consider seeking professional assistance. Additionally, keep in mind that attempting DIY repairs may void your warranty.

Tools and Materials:

  • Replacement back glass for iPhone XR
  • Heat gun or hairdryer
  • Precision screwdriver set
  • Plastic pry tools
  • Adhesive tape or glue
  • Isopropyl alcohol and a microfiber cloth
  • Patience and steady hands

Step 1: Gather Your Tools and Set Up:
Create a clean and well-lit workspace with all the necessary tools and replacement parts within reach. Ensure the iPhone XR is powered off.

Step 2: Remove the Broken Back Glass:
Use a heat gun or hairdryer to gently warm the edges of the broken back glass. The heat will soften the adhesive, making it easier to remove. Take care not to overheat the device.

Step 3: Pry Open the Device:
Once the glass is warmed, use plastic pry tools to carefully separate the broken back glass from the frame. Start at a corner and work your way around. Apply even pressure to avoid damaging the internal components.

Step 4: Disconnect Cables and Remove Components:
Once the back glass is removed, locate and disconnect any cables attached to the back cover. Remove any components, such as the wireless charging pad, that may be attached to the broken glass.

Step 5: Clean the Surface:
Wipe down the iPhone XR frame with isopropyl alcohol and a microfiber cloth to ensure a clean surface for the new back glass to adhere to. Remove any adhesive residue left by the old glass.

Step 6: Attach the Replacement Back Glass:
Position the replacement back glass over the device and carefully attach it to the frame. Ensure a snug fit and press along the edges to secure the glass in place.

Step 7: Reconnect Cables and Reassemble:
Reconnect any cables that were disconnected and reattach components such as the wireless charging pad. Carefully place the back cover onto the frame and press along the edges to secure it.

Step 8: Apply Adhesive Tape or Glue:
If needed, use adhesive tape or glue to secure the replacement back glass firmly to the frame. Ensure it’s evenly applied for a secure and seamless finish.

Step 9: Power On and Test:
Power on your iPhone XR and test all functions, including the camera, wireless charging, and buttons, to ensure everything is working correctly.

Congratulations! You’ve successfully replaced the broken back glass of your iPhone XR. This DIY repair not only saves you money but also offers a sense of accomplishment. Remember to refer to specific repair guides for your device model, exercise caution throughout the process, and enjoy your revived iPhone XR. Happy repairing!

Leave a Reply

Your email address will not be published. Required fields are marked *