Nokia 3310 keypad 789 not working? Here’s what to do!

Learning how to fix an issue with your Nokia 3310 keypad can be tricky if you don’t know what the problem really is, and even trickier if you aren’t aware of which are the most common causes of this issue. If you have found yourself in this situation and want to get rid of your Nokia 3310 keypad 789 not working, then here’s what you need to do! Just follow these simple steps and you will be good to go again in no time!

General information

If your Nokia 3310 keypad 789 is misbehaving, there are several things you can try. First, check for a protective cover or screen guard on your phone. Sometimes these interfere with touchscreen functionality, so take them off if possible. Second, restart your phone – often resetting it (powering it down and back up) will allow it to perform normally again. And finally, give up and buy a new one!

The Nokia 3310 has been discontinued for years now, but you can still find used models online. Just make sure that any replacement model you purchase includes a functioning keypad before buying it.
The Nokia 3310 was released in 2000 as part of Nokia’s line of bar phones. It was an instant hit thanks to its sturdy design and simple interface, which included just enough features to keep users happy without overwhelming them with too many options or confusing buttons.

Ways to fix this issue without taking it apart

Try using a Q-tip and rubbing alcohol (rubbing alcohol will soften any dried moisture on your phone). If that does not work, you can try drying it out with a blow dryer. Make sure you blow it in short bursts so you don’t overheat your phone. Once you think it is completely dry (and cool), try turning it back on.

Also, make sure to check that there is no water damage inside your device. If none of these options worked for you, take it apart. First remove your battery cover by pressing down on two opposite corners of it until they pop off. Then remove your battery by pulling up on one corner of it until it pops out of its slot. Next, pull up from under each side of your Nokia 3310 keypad 789 case until all four corners are loose enough for you to lift them off entirely.

Taking the phone apart

In case Nokia 3310 keypad repair doesn’t solve your problem, you can take apart and check if any of the buttons are loose. Loose buttons can be an issue with simple steps and a screwdriver. If none of them seem to be missing, try giving it a quick blow from your hairdryer. The hot air will help expand out any internal cracks in wires. To avoid overheating, let it cool down for 10 minutes before using again.

Adding some solder to certain points on the motherboard

First, find out which components are at fault by referring to your service manual. After that, open up your phone and check for loose connections or broken connections. If you see any signs of damage, you’ll have to make an order for a replacement part. Next, check if there is any corrosion on parts such as SIM card connectors. If there is corrosion, clean it off with alcohol and a cotton swab.

Reassemble everything carefully

If your Nokia phone turns on but won’t respond when you press a button, it may be because one of its small parts—like a screw or spring—fell out of place during shipping. Make sure everything looks right before starting; then put things back together and test. If that doesn’t work, you might need to replace an internal part. But if you’re not comfortable disassembling your phone yourself, bring it into a professional for repair. Most cell phone stores offer service plans for repairs as well as sales.

Leave a Comment