How to replace your Infinix Note 10 battery

If you have an Infinix note 10, you’ll be happy to know that there are some simple steps you can take to replace the battery on your own without going to the mobile repairing shop every time your phone runs out of juice. You should also know that these steps might change depending on where you purchased your phone and whether it’s an international or domestic version of the device. So this guide will be helpful if you have any version of the phone, but it may not apply to all models in all places. Let’s get started!

getting replacement batteries

The first thing you need to do is purchase a replacement battery. You can find these online or at a local electronics store. Once you have the battery, you need to begin the process of disassembling your Infinix note 10. This can be done by following a few simple steps. First, remove the back cover of the phone. Second, take out the screws that fasten the battery in place. Third, disconnect the battery from the phone. Fourth, insert the new battery and screw it in place.

before you start, check if its locked

The first thing you want to do before starting your Infinix note 10 disassembly is to check if the phone is locked. If it is, you’ll need to unlock it before proceeding. To do this, you’ll need to enter your passcode or fingerprint. Once you’ve done that, you can begin taking the phone apart.

opening the back cover

1. First, you’ll need to remove the back cover of your Infinix note 10.
2. To do this, locate the small notch at the bottom of the phone.
3. Insert a thin object (like a toothpick) into the notch and apply pressure until the back cover pops off.
4. Once the back cover is off, you should see the battery inside.

locating your battery and memory card

1. Power down your Infinix Note 10 and remove the SIM card tray.
2. Use a Phillips head screwdriver to remove the two screws on the back of the phone near the bottom.
3. Remove the back cover of the phone with care.
4. Locate the battery near the top of the phone and disconnect it from the motherboard by gently pulling it up.

removing the old battery

1. Power down your Infinix Note 10 and remove the SIM card tray.
2. Locate the small hole on the bottom left side of the phone, near the USB-C port.
3. Insert a SIM ejector tool or a paperclip into the hole and press firmly until the back panel pops off.
4. With the back panel removed, locate the battery connector and disconnect it.

putting in the new one

Infinix note 10 disassembly is pretty simple. Just follow these steps and you’ll have your new battery in no time.
1. Remove the back cover of your Infinix note 10.
2. Locate the battery compartment and remove the two screws that hold it in place.
3. Carefully remove the old battery, making sure not to damage any of the surrounding components.
4. Insert the new battery, screwing in the compartment tightly.

replacing back cover, bam! you are done!!

Here’s a quick guide on how to replace your Infinix note 10 battery. Start by removing the back cover. Use a small Phillips screwdriver to remove the two screws that hold the back cover in place. Next, use a spudger or an opening tool to pry the back cover off. Be careful not to damage the phone while doing this. Once you remove the back cover, you’ll see the battery. Use a plastic opening tool to pry the battery out of its compartment.

Leave a Comment